|
Dual Gauge / Dual
Channel Setups
Displaying and logging a dual channel setup using two
displays is very simple. Each display is connected directly to its own wideband
controller. Displays include a splitter allowing for data logging of each
wideband system simultaneously on the Zeitronix Data
Logger software.
Two ZR-2 Multi Gauges Connected to Two Zt-2s
Each ZR-2
Multi Gauge can display AFR/Lambda, Boost/Vacuum, EGT, and User2
data (configurable as air/fluid temperature, oil/fuel pressure).
The ZR-2 Multi Gauge
can display two values using both the outer edge of LEDs and inner digital
readout.
Possible displays are the
ZR-2 Multi Gauge (as shown),
ZR-1 AFR/Lambda
Gauge,
LCD Display ( ), or
the
Hacker/Tweaker display ( ).
Compare the Zt-2 and Zt-3 Widebands |
 |
ZR-2 and ZR-1 Gauges Connected to a Zt-2 and Zt-3
Connecting independent displays to a
Zt-2 and
Zt-3
wideband requires some consideration. The Zt-3 wideband will only be
outputting AFR/Lambda readings. In this case a
ZR-2 Multi Gauge can be used with the Zt-2. The
ZR-1 AFR/Lambda
Gauge may be used with the Zt-3. Keep in mind the digit size of the ZR-1
AFR/Lambda gauge is slightly larger than the ZR-2 Multi Gauge. Two ZR-2 Multi Gauges
may be used to ensure a consistent look (the second ZR-2 will only be displaying AFR/Lambda readings).Possible displays are the
ZR-2 Multi Gauge (as shown),
ZR-1 AFR/Lambda
Gauge,
LCD Display (),or
the
Hacker/Tweaker display ().
Compare the Zt-2 and Zt-3 Widebands |
|
Two ZR-1 AFR/Lambda Gauges Connected to Two Zt-3s
Connect two
ZR-1 AFR/Lambda Gauges to two Zt-3s.
Possible displays are the
ZR-1 AFR/Lambda
Gauges (as shown), or
the
Hacker/Tweaker display ().
Compare the Zt-2 and Zt-3 Widebands |
 |
Back to Dual-AFR Overview
|
