Zeitronix - Your Ultimate Tuning Partner

NEW Double SEMA 2014 Global Media Award Winning
Zeitronix E% Hacker/Tweaker Display for ECA-2


E % Hacker/Tweaker
A very small E 85 display for the ECA-2. Designed to fit into tight spots, full board dimensions are less than 2" by 1". The minimum opening to display the digital readout is only 0.56 x 1.4 inches. It's an open frame and bare board display meant to be mounted in the dash, in place of a stock clock or wherever you, the Hacker/Tweaker wants to mount a discrete E % display. Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the ECA-2 GAUGE port. Requires ECA-2 for operation. This is an open frame unit. Handle with care and keep ESD precautions.

Available in BLUE and RED

  • Full board dimensions are less than 2" by 1", only 1.975 x .930 inches (50.17 x 23.62 mm),
    board thickness is approximately 0.5" (12 mm)
  • Digit readout area is 0.56 x 1.40 inches (14.22 x 35.56 mm)
  • Two mounting holes for #4 (or 3mm) screws.
  • Cable length is 5 feet to reach your under dash ECA-2 and can be extended if necessary
Installed E% Display
with optional tint foil (not included)


Custom in dash instalation.